Choppy Hi10p Playback on new laptop, stumped...
Hello All,
I am getting choppy video playing Hi10p encoded Anime on my new HP laptop (Specs listed at the bottom) but audio playback is working properly. I am not very savy when it comes to codecs and player configurations for all of my other PC's (some much older) play these videos fine with just XBMC 12.2 installed. First I installed all the latest A/V drivers from AMD. Then I tried playing with XBMC, VLC, and MPC using the config listed in the URL below. All with no change. After days of googleing for anything related to my hardware and Hi10p playback and finding nothing I'm kinda at my wit's end here. Any help would be greatly appricieated. Thanks in advance. http://haruhichan.com/wpblog/205/hi10p-info-guide/ Laptop Model: HP 2000-2c11NR OS: Windows 7 Ultimate 64bit Processor: AMD Dual-Core E2-2000 APU Radeon HD Graphics 1.75 GHz Video: AMD Radeon HD 7340 Total Available Graphics Memory: 1969 MB Dedicated Video Memory: 384 MB System Video Memory: 0 MB Shared System Memory: 1585 MB Audio: AMD High Definition Audio RAM: 4GB DDR3 SDRAM (1 DIMM) |
As far as I'm aware of, all you should need is CCCP and Media Player Classic (which comes with CCCP). You shouldn't be doing any tweaking if you just want to watch 10bit anime. Just install CCCP and you should be good to go. My recommedation is to start all over: uninstall everything and then install the latest CCCP version from the site (Yellow button). If you still have problems then use this FAQ as a guide:
http://www.cccp-project.net/wiki/index.php?title=FAQ |
If it still doesn't work, (depending on what video in particular) it might be because the CPU is too slow: http://www.cpubenchmark.net/cpu_look...00+APU&id=1867
|
As far as I'm aware, CCCP doesn't come with Hi10p playback capability. You need either madVR or mplayer2 for it. Given that the OP said he followed the Haruhi guide, which does cover a madVR install, the issue is probably with his CPU. My old laptop was an AMD dual-core clocking @2.1 GHz and I had to tweak madVR's settings to the lowest level just to get working playback that didn't glitch up. So my guess is the onboard graphics card in your CPU isn't good enough to support Hi10p playback, especially from madVR which is absurdly greedy with resources.
I suggest either try mplayer2 (with the smplayer GUI wrapper if you're not comfortable with the command line) or download the Kawai Codec Pack and set madVR to Lowest. If neither of those work, just give up full 10-bit playback and just set MPC-HC's renderer to EVR-CP. Especially if you're trying to play 1080p files. Dual-core is the bare minimum to playback 1080p, and your CPU is clocking at speeds I'd expect more from a new smartphone than a new laptop. |
Quote:
Quote:
|
Quote:
|
Quote:
Quote:
Quote:
|
Thanks to everyone for the advice. I will try each suggestion and report back the results. Thanks again.
|
All times are GMT -5. The time now is 15:14. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.